ToneAdapt

Loading...

Behringer V-Tone GM108 settings

Back in Black settings for Behringer V-Tone GM108

AC/DC · adapted 5 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a Behringer V-Tone GM108, set Gain 4, Bass 4, Mid 6.5, Treble 5, Amp model select 2, Gain mode select 1. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Squier Stratocaster · updated 2026-10-15

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Behringer V-Tone GM108 knobs

Gain
4
Bass
4
Mid
6.5
Treble
5
Amp model select
2
Gain mode select
1
Speaker sim select
1

Playing tips

  • Focus on a tight, percussive attack to match the original riff's clarity.
  • Use palm muting selectively to emphasize the dynamic response.
  • Experiment with finger placement to enhance articulation on chords.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Behringer V-Tone GM108 actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Behringer V-Tone GM108 settings for Back in Black?

Set Gain 4, Bass 4, Mid 6.5, Treble 5, Amp model select 2, Gain mode select 1.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Squier Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Behringer V-Tone GM108

All 21 songs for the Behringer V-Tone GM108 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.