ToneAdapt

Loading...

Blackstar ID:Core 10 V3 settings

Pride and Joy settings for Blackstar ID:Core 10 V3

Stevie Ray Vaughan · adapted 4 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Blackstar ID:Core 10 V3, select the Crunch preset, then set Gain 4, Volume 6, Isf 5, Dly type 1, Mod type 1, Rev type 1. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-09-26

Preset / mode
Crunch
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Blackstar ID:Core 10 V3 knobs

Gain
4
Volume
6
Isf
5
Dly type
1
Mod type
1
Rev type
1
Effect level
5
Manual store
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use a percussive attack to emphasize the Texas shuffle feel.
  • Keep your picking hand relaxed for dynamic response.
  • Focus on clean transitions between notes for clarity.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core 10 V3 actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:Core 10 V3 for Pride and Joy?

Start from the Crunch preset, then set Gain 4, Volume 6, Isf 5, Dly type 1, Mod type 1, Rev type 1.

Which pickup should I use for Pride and Joy?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core 10 V3

All 31 songs for the Blackstar ID:Core 10 V3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.