ToneAdapt

Loading...

Blackstar ID:Core 10 V4 settings

1979 settings for Blackstar ID:Core 10 V4

The Smashing Pumpkins · adapted 4 times on ToneAdapt

To get the The Smashing Pumpkins "1979" riff tone on a Blackstar ID:Core 10 V4, select the Clean Warm preset, then set Gain 0, Gain 4, Volume 6, Presence 5, Reverb 1.5, ISF 6. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-09-22

Preset / mode
Clean Warm
Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Blackstar ID:Core 10 V4 knobs

Gain
0
Gain
4
Volume
6
Presence
5
Reverb
1.5
ISF
6
Voice
1
Tap Tempo
0
Effects Level
0
Power Reduction
8

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in chorus set to a moderate level for added shimmer.
  • Engage reverb for a more spacious feel in the clean riff.
  • Consider using a compression pedal to smooth out dynamics and enhance sustain.

The original rig

What The Smashing Pumpkins used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core 10 V4 actually has.

Guitar
Fender Stratocaster (likely 1970s or early 80s, as used by Billy Corgan in studio)
Amp
Marshall JCM800 (modded with KT88 tubes, as used on Mellon Collie sessions)
Gain
4
Bass
5.5
Mid
6.5
Treble
6.5
Presence
5.5
Reverb
2.5
Full 1979 tone breakdown, effects and sources →

Different guitar or pedals? Get 1979 adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts The Smashing Pumpkins's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:Core 10 V4 for 1979?

Start from the Clean Warm preset, then set Gain 0, Gain 4, Volume 6, Presence 5, Reverb 1.5, ISF 6.

Which pickup should I use for 1979?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did The Smashing Pumpkins use on 1979?

Guitar: Fender Stratocaster (likely 1970s or early 80s, as used by Billy Corgan in studio). Amp: Marshall JCM800 (modded with KT88 tubes, as used on Mellon Collie sessions).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core 10 V4

All 47 songs for the Blackstar ID:Core 10 V4 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.