ToneAdapt

Loading...

Blackstar ID:Core Stereo 10 V3 settings

Master of Puppets settings for Blackstar ID:Core Stereo 10 V3

Metallica · adapted 10 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a Blackstar ID:Core Stereo 10 V3, set Gain 9, Volume 8, Reverb 0.5, Isf 7, Voice 5, Tap tempo 0. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Jackson JS Series Dinky JS11 · updated 2026-11-08

Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Blackstar ID:Core Stereo 10 V3 knobs

Gain
9
Volume
8
Reverb
0.5
Isf
7
Voice
5
Tap tempo
0
Effect type
0
Effect level
5

Built-in effects

  • Reverb on (Spring) · 0.5

Playing tips

  • Use tight palm muting for chugging riffs to achieve a percussive attack.
  • Focus on fast alternate picking to maintain clarity and articulation.
  • Keep your picking hand close to the bridge for a sharper tone.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:Core Stereo 10 V3 actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Blackstar ID:Core Stereo 10 V3 settings for Master of Puppets?

Set Gain 9, Volume 8, Reverb 0.5, Isf 7, Voice 5, Tap tempo 0.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Jackson JS Series Dinky JS11. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:Core Stereo 10 V3

All 9 songs for the Blackstar ID:Core Stereo 10 V3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.