ToneAdapt

Loading...

Blackstar ID:CORE Stereo 10 V4 settings

Man in the Box settings for Blackstar ID:CORE Stereo 10 V4

Alice in Chains · adapted 2 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Blackstar ID:CORE Stereo 10 V4, select the Super Crunch preset, then set Gain 7.5, Reverb 0.5, ISF 7, Effect Type 1, Effect Level 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Player Plus Stratocaster HSS · updated 2026-07-28

Preset / mode
Super Crunch
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Blackstar ID:CORE Stereo 10 V4 knobs

Gain
7.5
Reverb
0.5
ISF
7
Effect Type
1
Effect Level
5

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use tight palm muting for chugging riffs to achieve a percussive attack.
  • Dial in a moderate amount of reverb to add depth without washing out the tone.
  • Focus on aggressive picking to enhance the articulation of each note.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Blackstar ID:CORE Stereo 10 V4 actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Blackstar ID:CORE Stereo 10 V4 for Man in the Box?

Start from the Super Crunch preset, then set Gain 7.5, Reverb 0.5, ISF 7, Effect Type 1, Effect Level 5.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

These settings were adapted for a Fender Player Plus Stratocaster HSS. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Blackstar ID:CORE Stereo 10 V4

All 30 songs for the Blackstar ID:CORE Stereo 10 V4 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.