ToneAdapt

Loading...

Boss GX-10 settings

My Sacrifice settings for Boss GX-10

Creed · adapted 2 times on ToneAdapt

To get the Creed "My Sacrifice" riff tone on a Boss GX-10, use the JC Clean amp model on the clean channel, then set Gain 1.5, Bass 5, Mid 5, Treble 5. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a PRS SE Custom 24 · updated 2026-05-16

Amp model
JC Clean
Channel
Clean
Cab
Open back cabinet
Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss GX-10 knobs

Gain
1.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
2
Master
7
Bass
5.5
Mid
5.5
Treble
7
Presence
6

Effects chain

  1. 1reverbSpringMix 5 · Decay 4.5
  2. 2compressionCompLevel 5 · Ratio 3 · Attack 5 · Release 5 · Threshold 5

Playing tips

  • Use fingerstyle for a more dynamic and touch-sensitive response.
  • Focus on clean picking to maintain articulation in the ringing open strings.
  • Experiment with light palm muting on some notes for added texture.

The original rig

What Creed used on the recording, for reference. ToneAdapt translates this to the controls your Boss GX-10 actually has.

Guitar
PRS Mark Tremonti Signature (likely 2000-2001 spec, mahogany body, maple top, rosewood board)
Amp
Fender Twin Reverb (used for clean tones in studio)
Gain
0
Bass
5.5
Mid
5.5
Treble
7
Presence
6
Reverb
3.5
Full My Sacrifice tone breakdown, effects and sources →

Different guitar or pedals? Get My Sacrifice adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Creed's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Boss GX-10 for My Sacrifice?

Use the JC Clean (clean channel) with Drive 2, Master 7, Bass 5.5, Mid 5.5, Treble 7, Presence 6, followed by Spring, Comp.

Which pickup should I use for My Sacrifice?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Creed use on My Sacrifice?

Guitar: PRS Mark Tremonti Signature (likely 2000-2001 spec, mahogany body, maple top, rosewood board). Amp: Fender Twin Reverb (used for clean tones in studio).

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss GX-10

All 52 songs for the Boss GX-10 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.