ToneAdapt

Loading...

Boss GX-10 settings

Pride and Joy settings for Boss GX-10

Stevie Ray Vaughan · adapted 3 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Boss GX-10, use the Blues amp model on the clean channel, then set Drive 4, Master 7, Bass 7, Mid 7, Treble 6, Presence 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Telecaster · updated 2026-08-20

Amp model
Blues
Channel
Clean
Cab
2x12 open back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
4
Master
7
Bass
7
Mid
7
Treble
6
Presence
5

Effects chain

  1. 1overdriveT-ScreamGain 3.5 · Tone 5 · Level 8
  2. 2compressionCompLevel 5 · Sustain 5
  3. 3reverbSpringMix 4 · Decay 3

Playing tips

  • Focus on a percussive attack to capture the Texas shuffle feel.
  • Utilize fingerstyle for dynamic response and touch sensitivity.
  • Emphasize clean articulation while maintaining slight grit from the overdrive.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Boss GX-10 actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Boss GX-10 for Pride and Joy?

Use the Blues (clean channel) with Drive 4, Master 7, Bass 7, Mid 7, Treble 6, Presence 5, followed by T-Scream, Comp, Spring.

Which pickup should I use for Pride and Joy?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Fender Telecaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss GX-10

All 52 songs for the Boss GX-10 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.