ToneAdapt

Loading...

Boss GX-100 settings

Man in the Box settings for Boss GX-100

Alice in Chains · adapted 2 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Boss GX-100, use the Recti Stack amp model on the lead channel, then set Drive 8, Master 7, Bass 6, Mid 6, Treble 7, Presence 6. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a PRS SE Custom 24 · updated 2026-11-13

Amp model
Recti Stack
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
8
Master
7
Bass
6
Mid
6
Treble
7
Presence
6
Original drive
8

Effects chain

  1. 1distortionMT-2Gain 8 · Bass 5 · Mid 5 · Treble 6 · Level 7
  2. 2noise gateNoise GateRelease 3 · Threshold 5
  3. 3reverbSpringMix 2 · Decay 3
  4. 4boostSD-1Gain 3 · Tone 5 · Level 7

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive picking to enhance the percussive attack.
  • Maintain a steady rhythm to emphasize the crushing intensity.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Boss GX-100 actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Boss GX-100 for Man in the Box?

Use the Recti Stack (lead channel) with Drive 8, Master 7, Bass 6, Mid 6, Treble 7, Presence 6, followed by MT-2, Noise Gate, Spring, SD-1.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss GX-100

All 36 songs for the Boss GX-100 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.