ToneAdapt

Loading...

Boss Katana 100 Gen 3 settings

Comfortably Numb settings for Boss Katana 100 Gen 3

Pink Floyd · adapted 4 times on ToneAdapt

To get the Pink Floyd "Comfortably Numb" solo tone on a Boss Katana 100 Gen 3, set Gain 5, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 3. Use the neck + middle pickup with your guitar's tone on 10 and volume on 10.

Solo settings

updated 2026-10-25

Pickup
Neck + Middle
Guitar knobs
Tone 10 · Volume 10

Boss Katana 100 Gen 3 knobs

Gain
5
Bass
5
Mid
6
Treble
7
Presence
6
Reverb
3
Fx
0
Bst
0
Contour
2
Variation
1
Solo boost
1
Cab resonance
1
Power control
2

Built-in effects

  • Delay on
  • Reverb on (Plate) · 3
  • Flanger on

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the chorus effect to add lush modulation to your lead lines.
  • Utilize the solo boost for increased volume and sustain during the solo section.

The original rig

What Pink Floyd used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 100 Gen 3 actually has.

Guitar
1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck)
Amp
Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet)
Gain
5
Bass
6.5
Mid
7.5
Treble
7
Presence
6
Reverb
2.5
Full Comfortably Numb tone breakdown, effects and sources →

Different guitar or pedals? Get Comfortably Numb adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pink Floyd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 100 Gen 3 settings for Comfortably Numb?

Set Gain 5, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 3.

Which pickup should I use for Comfortably Numb?

Neck + Middle, with the guitar's tone at 10 and volume at 10.

What gear did Pink Floyd use on Comfortably Numb?

Guitar: 1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck). Amp: Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 100 Gen 3

All 84 songs for the Boss Katana 100 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.