ToneAdapt

Loading...

Boss Katana 100 Gen 3 settings

Gravity settings for Boss Katana 100 Gen 3

John Mayer · adapted 2 times on ToneAdapt

To get the John Mayer "Gravity" solo tone on a Boss Katana 100 Gen 3, set Gain 1.5, Bass 5, Mid 6, Treble 6, Presence 5, Reverb 0. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Solo settings

Adapted for a Yamaha Revstar RSE20 · updated 2026-10-14

Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss Katana 100 Gen 3 knobs

Gain
1.5
Bass
5
Mid
6
Treble
6
Presence
5
Reverb
0
Fx
0
Bst
0
Contour
1
Variation
0
Solo boost
1
Cab resonance
0
Power control
2

Playing tips

  • Use your amp's built-in reverb set to a moderate level for spaciousness.
  • Engage the solo boost for added volume and sustain during the solo.
  • Utilize fingerstyle technique for touch-sensitive dynamics.

The original rig

What John Mayer used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana 100 Gen 3 actually has.

Guitar
Fender Stratocaster (likely John Mayer Signature or 1964 Stratocaster, as used on Continuum studio recording)
Amp
Two Rock Custom Reverb Signature and Dumble Overdrive Special (both blended in studio)
Gain
4
Bass
6.5
Mid
6
Treble
6
Presence
5.5
Reverb
5
Full Gravity tone breakdown, effects and sources →

Different guitar or pedals? Get Gravity adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts John Mayer's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana 100 Gen 3 settings for Gravity?

Set Gain 1.5, Bass 5, Mid 6, Treble 6, Presence 5, Reverb 0.

Which pickup should I use for Gravity?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did John Mayer use on Gravity?

Guitar: Fender Stratocaster (likely John Mayer Signature or 1964 Stratocaster, as used on Continuum studio recording). Amp: Two Rock Custom Reverb Signature and Dumble Overdrive Special (both blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Revstar RSE20. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana 100 Gen 3

All 84 songs for the Boss Katana 100 Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.