ToneAdapt

Loading...

Boss Katana Artist Gen 3 settings

Back In Black settings for Boss Katana Artist Gen 3

AC/DC · adapted 3 times on ToneAdapt

To get the AC/DC "Back In Black" riff tone on a Boss Katana Artist Gen 3, set Gain 4, Bass 5, Mid 7, Treble 5, Presence 5, Resonance 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Gibson Les Paul Tribute · updated 2026-10-12

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Boss Katana Artist Gen 3 knobs

Gain
4
Bass
5
Mid
7
Treble
5
Presence
5
Resonance
5
Reverb
0
Fx
0
Bst
0
Bloom
1
Contour
0
Variation
0
Solo boost
0
Solo delay
0
Cab resonance
0
Power control
2

Playing tips

  • Focus on a tight picking attack for clarity in the riff.
  • Use palm muting selectively to accentuate the percussive nature of the chords.
  • Experiment with dynamics; play harder for a more aggressive sound.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Boss Katana Artist Gen 3 actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back In Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back In Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Boss Katana Artist Gen 3 settings for Back In Black?

Set Gain 4, Bass 5, Mid 7, Treble 5, Presence 5, Resonance 5.

Which pickup should I use for Back In Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back In Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Gibson Les Paul Tribute. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Boss Katana Artist Gen 3

All 38 songs for the Boss Katana Artist Gen 3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.