ToneAdapt

Loading...

Fender Champion II 50 settings

Smoke on the Water settings for Fender Champion II 50

Deep Purple · adapted 3 times on ToneAdapt

To get the Deep Purple "Smoke on the Water" riff tone on a Fender Champion II 50, select the British: British '60s preset, then set Gain 6, Bass 5, Treble 7, Reverb 0, TAP 0, Modify 5. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Squier Stratocaster · updated 2026-10-04

Preset / mode
British: British '60s
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Fender Champion II 50 knobs

Gain
6
Bass
5
Treble
7
Reverb
0
TAP
0
Modify
5
FX Level
0
FX Select
0

Playing tips

  • Use a tight picking attack to emphasize the percussive nature of the riff.
  • Focus on palm muting for a punchy sound on the lower strings.
  • Experiment with dynamics; play softer for cleaner notes and harder for a more aggressive tone.

The original rig

What Deep Purple used on the recording, for reference. ToneAdapt translates this to the controls your Fender Champion II 50 actually has.

Guitar
1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups)
Amp
Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version)
Gain
6
Bass
6
Mid
7
Treble
7
Presence
6.5
Reverb
0.5
Full Smoke on the Water tone breakdown, effects and sources →

Different guitar or pedals? Get Smoke on the Water adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Deep Purple's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Champion II 50 for Smoke on the Water?

Start from the British: British '60s preset, then set Gain 6, Bass 5, Treble 7, Reverb 0, TAP 0, Modify 5.

Which pickup should I use for Smoke on the Water?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Deep Purple use on Smoke on the Water?

Guitar: 1968 Fender Stratocaster (rosewood fretboard, stock single-coil pickups). Amp: Marshall Major 200W head (model 1967, 4x12 cabinet, late 1960s/early 1970s version).

Will these settings work with my guitar?

These settings were adapted for a Squier Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Champion II 50

All 33 songs for the Fender Champion II 50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.