ToneAdapt

Loading...

Fender Mustang GTX 100 settings

Man in the Box settings for Fender Mustang GTX 100

Alice in Chains · adapted 4 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Fender Mustang GTX 100, select the '80s British preset, then set Gain 7.5, Bass 5, Mid 6.5, Treble 6, Reverb 0.5, Master volume 6. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-09-13

Preset / mode
'80s British
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Fender Mustang GTX 100 knobs

Gain
7.5
Bass
5
Mid
6.5
Treble
6
Reverb
0.5
Master volume
6

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use tight palm muting for chugging riffs to achieve the aggressive rhythm crunch.
  • Focus on percussive attack while playing to maintain clarity in the notes.
  • Experiment with the amp's built-in reverb set to a low level to add slight depth without washing out the tone.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang GTX 100 actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang GTX 100 for Man in the Box?

Start from the '80s British preset, then set Gain 7.5, Bass 5, Mid 6.5, Treble 6, Reverb 0.5, Master volume 6.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang GTX 100

All 58 songs for the Fender Mustang GTX 100 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.