ToneAdapt

Loading...

Fender Mustang I (V.2) settings

For Whom the Bell Tolls settings for Fender Mustang I (V.2)

Metallica · adapted 2 times on ToneAdapt

To get the Metallica "For Whom the Bell Tolls" riff tone on a Fender Mustang I (V.2), select the British '80s preset, then set Gain 7.5, Bass 6, Treble 7, Reverb 0, Modulation 0, Delay reverb 0. Use the bridge pickup with your guitar's tone on 8 and volume on 8-9.

Riff settings

Adapted for a B.C. Rich Bronze Series Warlock · updated 2026-08-16

Preset / mode
British '80s
Pickup
Bridge pickup
Guitar knobs
Tone 8 · Volume 8-9

Fender Mustang I (V.2) knobs

Gain
7.5
Bass
6
Treble
7
Reverb
0
Modulation
0
Delay reverb
0

Playing tips

  • Focus on aggressive palm muting for tight articulation.
  • Use alternate picking for clarity in fast passages.
  • Maintain a steady rhythm to emphasize the percussive nature of the riff.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang I (V.2) actually has.

Guitar
Gibson Explorer (likely 1984 model, stock pickups at time of recording)
Amp
Marshall JMP 2203 (modified, 100W head, used in studio for Ride the Lightning 1984)
Gain
7.5
Bass
6
Mid
4.5
Treble
7
Presence
6
Reverb
0
Full For Whom the Bell Tolls tone breakdown, effects and sources →

Different guitar or pedals? Get For Whom the Bell Tolls adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang I (V.2) for For Whom the Bell Tolls?

Start from the British '80s preset, then set Gain 7.5, Bass 6, Treble 7, Reverb 0, Modulation 0, Delay reverb 0.

Which pickup should I use for For Whom the Bell Tolls?

Bridge pickup, with the guitar's tone at 8 and volume at 8-9.

What gear did Metallica use on For Whom the Bell Tolls?

Guitar: Gibson Explorer (likely 1984 model, stock pickups at time of recording). Amp: Marshall JMP 2203 (modified, 100W head, used in studio for Ride the Lightning 1984).

Will these settings work with my guitar?

These settings were adapted for a B.C. Rich Bronze Series Warlock. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang I (V.2)

All 57 songs for the Fender Mustang I (V.2) →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.