ToneAdapt

Loading...

Fender Mustang I (V.2) settings

Pride and Joy settings for Fender Mustang I (V.2)

Stevie Ray Vaughan · adapted 4 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Fender Mustang I (V.2), select the British '60s preset, then set Gain 4, Bass 6, Treble 7, Reverb 1, Modulation 0, Delay reverb 0. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Yamaha Pacifica 012 · updated 2026-10-20

Preset / mode
British '60s
Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Fender Mustang I (V.2) knobs

Gain
4
Bass
6
Treble
7
Reverb
1
Modulation
0
Delay reverb
0

Built-in effects

  • Reverb on (Spring) · 1

Playing tips

  • Use a percussive attack to emphasize the Texas shuffle feel.
  • Maintain a light touch for dynamic response and to let the amp breathe.
  • Engage the amp's built-in reverb to add depth without overwhelming the tone.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang I (V.2) actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang I (V.2) for Pride and Joy?

Start from the British '60s preset, then set Gain 4, Bass 6, Treble 7, Reverb 1, Modulation 0, Delay reverb 0.

Which pickup should I use for Pride and Joy?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Pacifica 012. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang I (V.2)

All 57 songs for the Fender Mustang I (V.2) →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.