ToneAdapt

Loading...

Fender Mustang I settings

Man in the Box settings for Fender Mustang I

Alice in Chains · adapted 3 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Fender Mustang I, select the BRIT 64 RHYTHM preset, then set Gain 7.5, Bass 5, Treble 7, Reverb 0.5, Preset select 1, Modulation select 0. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-09-29

Preset / mode
BRIT 64 RHYTHM
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Fender Mustang I knobs

Gain
7.5
Bass
5
Treble
7
Reverb
0.5
Preset select
1
Modulation select
0
Delay reverb select
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use tight palm muting for chugging riffs to achieve a percussive attack.
  • Focus on aggressive strumming to enhance the crunch and intensity of the tone.
  • Experiment with your amp's built-in reverb set to a low level to recreate the spacious feel of the original tone.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang I actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang I for Man in the Box?

Start from the BRIT 64 RHYTHM preset, then set Gain 7.5, Bass 5, Treble 7, Reverb 0.5, Preset select 1, Modulation select 0.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang I

All 34 songs for the Fender Mustang I →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.