ToneAdapt

Loading...

Fender Mustang I settings

Pride and Joy settings for Fender Mustang I

Stevie Ray Vaughan · adapted 2 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Fender Mustang I, select the FENDER CLEAN preset, then set Gain 4, Bass 6, Treble 7, Reverb 1, Preset select 1, Modulation select 0. Use the bridge pickup with your guitar's tone on 7 and volume on 8-9.

Riff settings

Adapted for a PRS SE Custom 24 · updated 2026-10-26

Preset / mode
FENDER CLEAN
Pickup
Bridge pickup
Guitar knobs
Tone 7 · Volume 8-9

Fender Mustang I knobs

Gain
4
Bass
6
Treble
7
Reverb
1
Preset select
1
Modulation select
0
Delay reverb select
0

Built-in effects

  • Reverb on (Spring) · 1

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Focus on a percussive attack to capture the Texas shuffle feel.
  • Maintain a light touch on the strings to allow for dynamic response.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang I actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang I for Pride and Joy?

Start from the FENDER CLEAN preset, then set Gain 4, Bass 6, Treble 7, Reverb 1, Preset select 1, Modulation select 0.

Which pickup should I use for Pride and Joy?

Bridge pickup, with the guitar's tone at 7 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a PRS SE Custom 24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang I

All 34 songs for the Fender Mustang I →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.