ToneAdapt

Loading...

Fender Mustang (V2 Series) settings

Back in Black settings for Fender Mustang (V2 Series)

AC/DC · adapted 4 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a Fender Mustang (V2 Series), select the British '70s preset, then set Gain 4, Bass 5, Treble 5, Tap tempo 0, Mid control 7, Effect level 0. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone SG Standard · updated 2026-08-26

Preset / mode
British '70s
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Fender Mustang (V2 Series) knobs

Gain
4
Bass
5
Treble
5
Tap tempo
0
Mid control
7
Effect level
0

Playing tips

  • Use a tight picking technique for a percussive attack.
  • Focus on palm muting for the lower notes to enhance clarity.
  • Experiment with dynamics; play softer for clean notes and harder for crunch.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Fender Mustang (V2 Series) actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Fender Mustang (V2 Series) for Back in Black?

Start from the British '70s preset, then set Gain 4, Bass 5, Treble 5, Tap tempo 0, Mid control 7, Effect level 0.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Epiphone SG Standard. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Mustang (V2 Series)

All 27 songs for the Fender Mustang (V2 Series) →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.