ToneAdapt

Loading...

Fender Rumble 40 settings

Silvera settings for Fender Rumble 40

GOJIRA · adapted 2 times on ToneAdapt

To get the GOJIRA "Silvera" distorted tone on a Fender Rumble 40, set Gain 7.5, Drive 3, Bass 4, Mid 7, Treble 7, Bright voicing 0. Use the bridge humbucker (growl + articulation) pickup.

Distorted settings

updated 2026-10-26

Pickup
Bridge humbucker (growl + articulation)

Fender Rumble 40 knobs

Gain
7.5
Drive
3
Bass
4
Mid
7
Treble
7
Bright voicing
0
Overdrive gain
7
Contour voicing
0
Overdrive level
6
Vintage voicing
0

Playing tips

  • Use a firm pick attack to emphasize the clankiness of the tone.
  • Experiment with the overdrive settings to find the right balance of saturation.
  • Keep your hand close to the bridge for a tighter sound.

The original rig

What GOJIRA used on the recording, for reference. ToneAdapt translates this to the controls your Fender Rumble 40 actually has.

Bass
ESP Eclipse (Joe Duplantier signature, likely custom shop or LTD variation)
Amp
EVH 5150 III (studio recording amp, not live rig)
Gain
9
Bass
6
Mid
5.5
Treble
7
Presence
6.5
Reverb
1
Full Silvera tone breakdown, effects and sources →

Different bass or pedals? Get Silvera adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts GOJIRA's tone to your own bass, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Fender Rumble 40 settings for Silvera?

Set Gain 7.5, Drive 3, Bass 4, Mid 7, Treble 7, Bright voicing 0.

Which pickup should I use for Silvera?

Bridge humbucker (growl + articulation).

What gear did GOJIRA use on Silvera?

Bass: ESP Eclipse (Joe Duplantier signature, likely custom shop or LTD variation). Amp: EVH 5150 III (studio recording amp, not live rig).

Will these settings work with my bass?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact bass, pickups, amp and pedals.

Silvera on other amps

Popular songs on the Fender Rumble 40

All 25 songs for the Fender Rumble 40 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.