ToneAdapt

Loading...

Fender Tone Master Pro settings

Even Flow settings for Fender Tone Master Pro

Pearl Jam · adapted 5 times on ToneAdapt

To get the Pearl Jam "Even Flow" riff tone on a Fender Tone Master Pro, use the Brit 800 (Marshall JCM800) amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 6, Presence 6. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-10-01

Amp model
Brit 800 (Marshall JCM800)
Channel
Crunch
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
6
Master
7
Bass
6
Mid
7
Treble
6
Presence
6

Effects chain

  1. 1overdrive808 Overdrive (TS808)Gain 5 · Tone 6 · Level 7
  2. 2reverbSpring ReverbMix 3 · Decay 4
  3. 3noise gateNoise GateRelease 5 · Threshold 4

Playing tips

  • Focus on a tight, percussive attack to match the original riff's punch.
  • Use palm muting for added definition and to emphasize the rhythm.
  • Experiment with dynamics, playing aggressively for a raw feel.

The original rig

What Pearl Jam used on the recording, for reference. ToneAdapt translates this to the controls your Fender Tone Master Pro actually has.

Guitar
Gibson Les Paul Standard (Stone Gossard, riff section)
Amp
Marshall JCM800 (cranked, studio recording)
Gain
6.5
Bass
6
Mid
7
Treble
6.5
Presence
6
Reverb
2
Full Even Flow tone breakdown, effects and sources →

Different guitar or pedals? Get Even Flow adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pearl Jam's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Fender Tone Master Pro for Even Flow?

Use the Brit 800 (Marshall JCM800) (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 6, Presence 6, followed by 808 Overdrive (TS808), Spring Reverb, Noise Gate.

Which pickup should I use for Even Flow?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Pearl Jam use on Even Flow?

Guitar: Gibson Les Paul Standard (Stone Gossard, riff section). Amp: Marshall JCM800 (cranked, studio recording).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fender Tone Master Pro

All 58 songs for the Fender Tone Master Pro →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.