ToneAdapt

Loading...

Flamma FX100 settings

Creep settings for Flamma FX100

Radiohead · adapted 2 times on ToneAdapt

To get the Radiohead "Creep" riff tone on a Flamma FX100, use the Dual Rectifier amp model on the lead channel, then set Drive 7, Master 7, Bass 6, Mid 7, Treble 7, Presence 6. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-09-17

Amp model
Dual Rectifier
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
7
Master
7
Bass
6
Mid
7
Treble
7
Presence
6

Effects chain

  1. 1distortionPROCO RATVolume 7 · Filter 5 · Distortion 7
  2. 2reverbSPRING REVERBMix 3 · Decay 3

Playing tips

  • Use a tight palm muting technique for chugging parts.
  • Aggressively pick the strings to achieve a punchy attack.
  • Experiment with your picking dynamics to emphasize the percussive elements of the riff.

The original rig

What Radiohead used on the recording, for reference. ToneAdapt translates this to the controls your Flamma FX100 actually has.

Guitar
Fender Telecaster (Jonny Greenwood's main guitar on 'Creep')
Amp
Mesa/Boogie Dual Rectifier Trem-O-Verb Combo Amp
Gain
7
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
2
Full Creep tone breakdown, effects and sources →

Different guitar or pedals? Get Creep adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Radiohead's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Flamma FX100 for Creep?

Use the Dual Rectifier (lead channel) with Drive 7, Master 7, Bass 6, Mid 7, Treble 7, Presence 6, followed by PROCO RAT, SPRING REVERB.

Which pickup should I use for Creep?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Radiohead use on Creep?

Guitar: Fender Telecaster (Jonny Greenwood's main guitar on 'Creep'). Amp: Mesa/Boogie Dual Rectifier Trem-O-Verb Combo Amp.

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Flamma FX100

All 8 songs for the Flamma FX100 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.