ToneAdapt

Loading...

Fractal Audio FM3 settings

Raining Blood settings for Fractal Audio FM3

Slayer · adapted 3 times on ToneAdapt

To get the Slayer "Raining Blood" riff tone on a Fractal Audio FM3, use the Brit 800 (Marshall JCM800) amp model on the lead channel, then set Drive 8, Master 7, Bass 5, Mid 5.5, Treble 7, Presence 7. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-09-11

Amp model
Brit 800 (Marshall JCM800)
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
8
Master
7
Bass
5
Mid
5.5
Treble
7
Presence
7

Effects chain

  1. 1overdriveT808Gain 3 · Tone 5 · Level 7
  2. 2noise gateNoise Gate
  3. 3distortionRat DistVolume 7 · Filter 5 · Distortion 5

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack to enhance articulation.
  • Maintain a staccato playing style for the riff.

The original rig

What Slayer used on the recording, for reference. ToneAdapt translates this to the controls your Fractal Audio FM3 actually has.

Guitar
B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era)
Amp
Marshall JCM800 2203
Gain
8.5
Bass
5
Mid
5.5
Treble
7
Presence
7
Reverb
0
Full Raining Blood tone breakdown, effects and sources →

Different guitar or pedals? Get Raining Blood adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Slayer's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Fractal Audio FM3 for Raining Blood?

Use the Brit 800 (Marshall JCM800) (lead channel) with Drive 8, Master 7, Bass 5, Mid 5.5, Treble 7, Presence 7, followed by T808, Noise Gate, Rat Dist.

Which pickup should I use for Raining Blood?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Slayer use on Raining Blood?

Guitar: B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era). Amp: Marshall JCM800 2203.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Fractal Audio FM3

All 11 songs for the Fractal Audio FM3 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.