ToneAdapt

Loading...

HeadRush Core settings

Iron Man settings for HeadRush Core

Black Sabbath · adapted 3 times on ToneAdapt

To get the Black Sabbath "Iron Man" riff tone on a HeadRush Core, use the 82 LEAD 800 100W (Marshall JCM800 100W) amp model on the lead channel, then set Gain 6, Bass 5, Mid 5, Treble 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-10.

Riff settings

Adapted for a PRS S2 McCarty 594 · updated 2026-08-06

Amp model
82 LEAD 800 100W (Marshall JCM800 100W)
Channel
Lead
Cab
4x12 closed-back cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-10

HeadRush Core knobs

Gain
6
Bass
5
Mid
5
Treble
5

Amp block

Drive
7
Master
7
Bass
7
Mid
7
Treble
6
Presence
5

Effects chain

  1. 1boostBOOST (Xotic EP Booster)Gain 5 · Level 10
  2. 2distortionBLACK OP DISTORTION (80s-era op-amp-based distortion pedal)Gain 8 · Tone 6 · Level 8
  3. 3noise gateNOISE GATE (ISP Technologies Decimator)Release 5 · Threshold 5

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive picking for a percussive attack.
  • Experiment with dynamics to enhance the riff's swagger.

The original rig

What Black Sabbath used on the recording, for reference. ToneAdapt translates this to the controls your HeadRush Core actually has.

Guitar
1965 Gibson SG Special
Amp
Laney Supergroup MK 1 100-watt head with Laney 4x12 cabinet (Celestion G12-25M speakers likely)
Gain
8
Bass
7.5
Mid
7.5
Treble
6
Presence
5.5
Reverb
0
Full Iron Man tone breakdown, effects and sources →

Different guitar or pedals? Get Iron Man adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Black Sabbath's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the HeadRush Core for Iron Man?

Use the 82 LEAD 800 100W (Marshall JCM800 100W) (lead channel) with Drive 7, Master 7, Bass 7, Mid 7, Treble 6, Presence 5, followed by BOOST (Xotic EP Booster), BLACK OP DISTORTION (80s-era op-amp-based distortion pedal), NOISE GATE (ISP Technologies Decimator).

Which pickup should I use for Iron Man?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-10.

What gear did Black Sabbath use on Iron Man?

Guitar: 1965 Gibson SG Special. Amp: Laney Supergroup MK 1 100-watt head with Laney 4x12 cabinet (Celestion G12-25M speakers likely).

Will these settings work with my guitar?

These settings were adapted for a PRS S2 McCarty 594. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the HeadRush Core

All 31 songs for the HeadRush Core →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.