ToneAdapt

Loading...

HeadRush MX5 settings

Raining Blood settings for HeadRush MX5

Slayer · adapted 6 times on ToneAdapt

To get the Slayer "Raining Blood" riff tone on a HeadRush MX5, use the 82 Lead 800 amp model on the lead channel, then set Drive 8, Master 7, Bass 5, Mid 5, Treble 7, Presence 7. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Schecter Demon-6 · updated 2026-11-05

Amp model
82 Lead 800
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
8
Master
7
Bass
5
Mid
5
Treble
7
Presence
7

Effects chain

  1. 1overdriveWhite BoostGain 5 · Bass 5 · Treble 6 · Level 7
  2. 2noise gateNoise GateRelease 3 · Threshold 5
  3. 3distortionBlackOp DistGain 8 · Volume 7 · Tone 6

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack to enhance articulation.
  • Maintain a staccato feel in your playing for percussive impact.

The original rig

What Slayer used on the recording, for reference. ToneAdapt translates this to the controls your HeadRush MX5 actually has.

Guitar
B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era)
Amp
Marshall JCM800 2203
Gain
8.5
Bass
5
Mid
5.5
Treble
7
Presence
7
Reverb
0
Full Raining Blood tone breakdown, effects and sources →

Different guitar or pedals? Get Raining Blood adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Slayer's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the HeadRush MX5 for Raining Blood?

Use the 82 Lead 800 (lead channel) with Drive 8, Master 7, Bass 5, Mid 5, Treble 7, Presence 7, followed by White Boost, Noise Gate, BlackOp Dist.

Which pickup should I use for Raining Blood?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Slayer use on Raining Blood?

Guitar: B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era). Amp: Marshall JCM800 2203.

Will these settings work with my guitar?

These settings were adapted for a Schecter Demon-6. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the HeadRush MX5

All 25 songs for the HeadRush MX5 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.