ToneAdapt

Loading...

HeadRush Pedalboard settings

Walk settings for HeadRush Pedalboard

Pantera · adapted 4 times on ToneAdapt

To get the Pantera "Walk" riff tone on a HeadRush Pedalboard, use the 82 LEAD 800 100W amp model on the lead channel, then set Drive 8, Master 7, Bass 6, Mid 3, Treble 7, Presence 7. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-10-23

Amp model
82 LEAD 800 100W
Channel
Lead
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
8
Master
7
Bass
6
Mid
3
Treble
7
Presence
7

Effects chain

  1. 1eqGRAPHIC EQBand 4 0 · Band 5 3 · Band 6 2
  2. 2noise gateNoise GateRelease 3 · Threshold 5
  3. 3distortionDC DISTORT DistortionGain 8 · Tone 6 · Level 7
  4. 4compressionDYN III COMPLevel 6 · Ratio 4 · Attack 5 · Release 4 · Threshold 4

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use a sharp pick attack to enhance clarity and definition.
  • Maintain a consistent picking rhythm to achieve a percussive sound.

The original rig

What Pantera used on the recording, for reference. ToneAdapt translates this to the controls your HeadRush Pedalboard actually has.

Guitar
Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power)
Amp
Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers)
Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Presence
7
Reverb
0
Full Walk tone breakdown, effects and sources →

Different guitar or pedals? Get Walk adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pantera's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the HeadRush Pedalboard for Walk?

Use the 82 LEAD 800 100W (lead channel) with Drive 8, Master 7, Bass 6, Mid 3, Treble 7, Presence 7, followed by GRAPHIC EQ, Noise Gate, DC DISTORT Distortion, DYN III COMP.

Which pickup should I use for Walk?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pantera use on Walk?

Guitar: Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power). Amp: Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the HeadRush Pedalboard

All 25 songs for the HeadRush Pedalboard →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.