Hotone Ampero II Stage settings
Jaded settings for Hotone Ampero II Stage
Aerosmith · adapted 2 times on ToneAdapt
To get the Aerosmith "Jaded" solo tone on a Hotone Ampero II Stage, use the UK Lead amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 6.5, Presence 6. Use the neck pickup with your guitar's tone on 8-10 and volume on 10.
Solo settings
updated 2026-08-27
- Amp model
- UK Lead
- Channel
- Crunch
- Cab
- 4x12 Celestion
- Pickup
- Neck pickup
- Guitar knobs
- Tone 8-10 · Volume 10
Amp block
- Drive
- 6
- Master
- 7
- Bass
- 6
- Mid
- 7
- Treble
- 6.5
- Presence
- 6
Effects chain
- 1overdriveGreen DriveGain 4 · Tone 6 · Level 7
- 2delayAnalog DelayMix 4 · Time 4 · Feedback 5
- 3modulationFlangerMix 5 · Rate 3 · Depth 3 · Feedback 4
- 4reverbSpringMix 3 · Decay 5
- 5noise gateNoise GateRelease 5 · Threshold 3
Playing tips
- Focus on smooth bends to emulate the singing sustain.
- Use a dynamic pick attack to achieve clear note separation.
- Incorporate melodic phrasing to capture the essence of the original solo.
Riff settings
updated 2026-08-27
- Amp model
- UK Green
- Channel
- Crunch
- Cab
- 4x12 Vintage
- Pickup
- Bridge pickup
- Guitar knobs
- Tone 7-8 · Volume 8-9
Amp block
- Drive
- 6
- Master
- 7
- Bass
- 6
- Mid
- 7
- Treble
- 6
- Presence
- 6
- Original drive
- 6
Effects chain
- 1overdriveGreen DriveGain 5 · Tone 6 · Level 7
- 2modulationClassic ChorusMix 5 · Rate 4 · Depth 5
- 3reverbPlateMix 4 · Decay 5
- 4compressionDyna CompLevel 7 · Sustain 6
- 5noise gateNoise GateRelease 5 · Threshold 4
Playing tips
- Focus on maintaining clarity in the riff while using a strong attack.
- Experiment with palm muting to add punch to the riff.
- Use a light touch on the strings to allow the natural sustain of the guitar to shine through.
The original rig
What Aerosmith used on the recording, for reference. ToneAdapt translates this to the controls your Hotone Ampero II Stage actually has.
- Guitar
- Gibson Les Paul Standard (likely late 50s reissue, possibly Joe Perry's signature or similar burst model)
- Amp
- Marshall amplifier (exact model unknown, likely JCM800 or similar, as per Perry's typical studio rig for this era)
- Gain
- 5.5
- Bass
- 6
- Mid
- 7
- Treble
- 6.5
- Presence
- 6
- Reverb
- 3
Different guitar or pedals? Get Jaded adapted to your exact rig
These settings were generated for the gear named above. ToneAdapt adapts Aerosmith's tone to your own guitar, pickups, amp and pedals in seconds.
Frequently asked questions
What amp model should I use on the Hotone Ampero II Stage for Jaded?
Use the UK Lead (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 6.5, Presence 6, followed by Green Drive, Analog Delay, Flanger, Spring, Noise Gate.
Which pickup should I use for Jaded?
Neck pickup, with the guitar's tone at 8-10 and volume at 10.
What gear did Aerosmith use on Jaded?
Guitar: Gibson Les Paul Standard (likely late 50s reissue, possibly Joe Perry's signature or similar burst model). Amp: Marshall amplifier (exact model unknown, likely JCM800 or similar, as per Perry's typical studio rig for this era).
Will these settings work with my guitar?
Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.
Popular songs on the Hotone Ampero II Stage
- Sweet Child O' Mine · Guns N' Roses
- Hotel California · Eagles
- Welcome to the Jungle · Guns N' Roses
- Master of Puppets · Metallica
- Enter Sandman · Metallica
- Holy Wars · Megadeth
- Walk · Pantera
- Raining Blood · Slayer
- Back in Black · AC/DC
- Wonderwall · Oasis
- Killing in the Name · Rage Against the Machine
- Whole Lotta Love · Led Zeppelin
Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.