ToneAdapt

Loading...

Hotone Ampero II Stage settings

What a Beautiful Name settings for Hotone Ampero II Stage

Hillsong Worship & Brooke Ligertwood · adapted 2 times on ToneAdapt

To get the Hillsong Worship & Brooke Ligertwood "What a Beautiful Name" riff tone on a Hotone Ampero II Stage, use the Black Lux amp model on the clean channel, then set Gain 1.5, Bass 5, Mid 5, Treble 5. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone Les Paul · updated 2026-09-17

Amp model
Black Lux
Channel
Clean
Cab
Open Back 2x12
Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Hotone Ampero II Stage knobs

Gain
1.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
2
Master
7
Bass
5.5
Mid
6
Treble
7
Presence
6
Original drive
2

Effects chain

  1. 1compressionV-CompLevel 5 · Ratio 3 · Attack 5 · Release 5
  2. 2delayAnalog DelayMix 4 · Feedback 5
  3. 3reverbSpringMix 5 · Decay 5

Playing tips

  • Use gentle fingerpicking for a smooth attack.
  • Incorporate dynamic swells by gradually increasing picking intensity.
  • Focus on clear note separation to maintain the ambient quality.

The original rig

What Hillsong Worship & Brooke Ligertwood used on the recording, for reference. ToneAdapt translates this to the controls your Hotone Ampero II Stage actually has.

Guitar
Fender American Standard Telecaster
Amp
Fender Hot Rod DeVille 212
Gain
0
Bass
5.5
Mid
6
Treble
7
Presence
6
Reverb
5.5
Full What a Beautiful Name tone breakdown, effects and sources →

Different guitar or pedals? Get What a Beautiful Name adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Hillsong Worship & Brooke Ligertwood's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Hotone Ampero II Stage for What a Beautiful Name?

Use the Black Lux (clean channel) with Drive 2, Master 7, Bass 5.5, Mid 6, Treble 7, Presence 6, followed by V-Comp, Analog Delay, Spring.

Which pickup should I use for What a Beautiful Name?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Hillsong Worship & Brooke Ligertwood use on What a Beautiful Name?

Guitar: Fender American Standard Telecaster. Amp: Fender Hot Rod DeVille 212.

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Hotone Ampero II Stage

All 35 songs for the Hotone Ampero II Stage →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.