ToneAdapt

Loading...

Kemper Profiler Stage settings

Walk settings for Kemper Profiler Stage

Pantera · adapted 5 times on ToneAdapt

To get the Pantera "Walk" riff tone on a Kemper Profiler Stage, use the Peavey 5150 / 6505 amp model on the lead channel, then set Drive 8, Master 7, Bass 6, Mid 3, Treble 8, Presence 7. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Gibson Les Paul · updated 2026-09-23

Amp model
Peavey 5150 / 6505
Channel
Lead
Cab
4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
8
Master
7
Bass
6
Mid
3
Treble
8
Presence
7

Effects chain

  1. 1eqGraphic EqualizerBand 5khz 2 · Band 10khz 2 · Band 640hz 0 · Band 1250hz 0 · Band 2500hz 0
  2. 2noise gateNoise GateThreshold 4
  3. 3overdriveGreen ScreamDrive 8 · Tone 5

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use a sharp pick attack to emphasize the percussive qualities of the notes.
  • Maintain a steady rhythm to keep the aggressive attack consistent.

The original rig

What Pantera used on the recording, for reference. ToneAdapt translates this to the controls your Kemper Profiler Stage actually has.

Guitar
Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power)
Amp
Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers)
Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Presence
7
Reverb
0
Full Walk tone breakdown, effects and sources →

Different guitar or pedals? Get Walk adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pantera's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Kemper Profiler Stage for Walk?

Use the Peavey 5150 / 6505 (lead channel) with Drive 8, Master 7, Bass 6, Mid 3, Treble 8, Presence 7, followed by Graphic Equalizer, Noise Gate, Green Scream.

Which pickup should I use for Walk?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pantera use on Walk?

Guitar: Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power). Amp: Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers).

Will these settings work with my guitar?

These settings were adapted for a Gibson Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Kemper Profiler Stage

All 14 songs for the Kemper Profiler Stage →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.