ToneAdapt

Loading...

Line 6 Helix Stadium XL Floor settings

I Will Not Bow settings for Line 6 Helix Stadium XL Floor

Breaking Benjamin · adapted 2 times on ToneAdapt

To get the Breaking Benjamin "I Will Not Bow" riff tone on a Line 6 Helix Stadium XL Floor, use the Revv Gen Red amp model on the lead channel, then set Gain 6.5, Bass 5, Mid 5, Treble 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

updated 2026-07-04

Amp model
Revv Gen Red
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Line 6 Helix Stadium XL Floor knobs

Gain
6.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
8
Master
7
Bass
6
Mid
4
Treble
7
Presence
6

Effects chain

  1. 1distortionHedgehog D9Gain 8 · Tone 7 · Level 7
  2. 2noise gateHard Gate
  3. 3overdriveMinotaurGain 3 · Tone 6 · Level 8

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive picking to enhance the percussive attack.
  • Experiment with dynamics to create contrast between heavy and lighter sections.

Solo settings

updated 2026-07-04

Amp model
Revv Gen Red
Channel
Lead
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Line 6 Helix Stadium XL Floor knobs

Gain
5.5
Bass
5
Mid
5
Treble
5

Amp block

Drive
8
Master
7
Bass
6
Mid
4
Treble
6
Presence
6
Original drive
8

Effects chain

  1. 1distortionHedgehog D9Gain 8 · Tone 6 · Level 7
  2. 2noise gateHard GateRelease 3 · Threshold 5
  3. 3overdriveMinotaurGain 3 · Tone 5 · Level 7

Playing tips

  • Use aggressive picking to achieve tight articulation on palm-muted chugs.
  • Incorporate tapping techniques for lead lines to enhance sustain and clarity.
  • Maintain a consistent attack for rhythmic sections to keep the tone focused and punchy.

The original rig

What Breaking Benjamin used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 Helix Stadium XL Floor actually has.

Guitar
PRS Custom 24 (likely 2000s model, Drop A# tuning)
Amp
Randall RM100 (likely with SL+ and Ultra Lead modules)
Gain
8.5
Bass
6
Mid
4.5
Treble
7
Presence
6.5
Reverb
1.5
Full I Will Not Bow tone breakdown, effects and sources →

Different guitar or pedals? Get I Will Not Bow adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Breaking Benjamin's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Line 6 Helix Stadium XL Floor for I Will Not Bow?

Use the Revv Gen Red (lead channel) with Drive 8, Master 7, Bass 6, Mid 4, Treble 7, Presence 6, followed by Hedgehog D9, Hard Gate, Minotaur.

Which pickup should I use for I Will Not Bow?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Breaking Benjamin use on I Will Not Bow?

Guitar: PRS Custom 24 (likely 2000s model, Drop A# tuning). Amp: Randall RM100 (likely with SL+ and Ultra Lead modules).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 Helix Stadium XL Floor

All 28 songs for the Line 6 Helix Stadium XL Floor →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.