ToneAdapt

Loading...

Line 6 POD Go / POD Go Wireless settings

Comfortably Numb settings for Line 6 POD Go / POD Go Wireless

Pink Floyd · adapted 4 times on ToneAdapt

To get the Pink Floyd "Comfortably Numb" solo tone on a Line 6 POD Go / POD Go Wireless, use the WhoWatt 100 (Hiwatt DR-103) amp model on the lead channel, then set Gain 3, Bass 5, Mid 5, Treble 5. Use the neck pickup with your guitar's tone on 10 and volume on 10.

Solo settings

Adapted for a Fender Telecaster · updated 2026-08-28

Amp model
WhoWatt 100 (Hiwatt DR-103)
Channel
Lead
Cab
4x12 closed back
Pickup
Neck pickup
Guitar knobs
Tone 10 · Volume 10

Line 6 POD Go / POD Go Wireless knobs

Gain
3
Bass
5
Mid
5
Treble
5

Amp block

Drive
5
Master
7
Bass
6.5
Mid
7.5
Treble
7
Presence
6

Effects chain

  1. 1fuzzBighorn (1973 Ram's Head Muff)Volume 5.5 · Tone 3.5 · Sustain 10
  2. 2modulationGrey FlangerMix 4 · Rate 3 · Depth 5 · Feedback 5
  3. 3delayTransistor TapeMix 3.5 · Feedback 3.5
  4. 4reverbPlateauxMix 2 · Decay 4
  5. 5overdriveScream 808Gain 4 · Tone 5 · Level 7

Playing tips

  • Focus on smooth, fluid finger movements to achieve a singing sustain.
  • Use a light touch for dynamic phrasing to maintain clarity in notes.
  • Experiment with subtle vibrato to enhance the violin-like quality of the tone.

Riff settings

Adapted for a Gibson Les Paul · updated 2026-08-28

Amp model
WhoWatt 100 (Hiwatt DR-103)
Channel
Crunch
Cab
4x12 cabinet with Fane Crescendo speakers
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Line 6 POD Go / POD Go Wireless knobs

Gain
3
Bass
5
Mid
5
Treble
5

Amp block

Drive
5
Master
7
Bass
6.5
Mid
5.5
Treble
5.5
Presence
6

Effects chain

  1. 1compressionRed Squeeze (Dyna Comp)Output 7 · Sensitivity 4
  2. 2modulation70s ChorusMix 5 · Rate 5 · Depth 5
  3. 3reverbPlateauxMix 4 · Decay 5

Playing tips

  • Focus on smooth, legato playing to achieve the lush sustain characteristic of the original tone.
  • Use light finger pressure to maintain clarity and note separation.
  • Experiment with dynamics by varying your picking strength to enhance the touch-sensitive response.

The original rig

What Pink Floyd used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 POD Go / POD Go Wireless actually has.

Guitar
1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck)
Amp
Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet)
Gain
5
Bass
6.5
Mid
7.5
Treble
7
Presence
6
Reverb
2.5
Full Comfortably Numb tone breakdown, effects and sources →

Different guitar or pedals? Get Comfortably Numb adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pink Floyd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Line 6 POD Go / POD Go Wireless for Comfortably Numb?

Use the WhoWatt 100 (Hiwatt DR-103) (lead channel) with Drive 5, Master 7, Bass 6.5, Mid 7.5, Treble 7, Presence 6, followed by Bighorn (1973 Ram's Head Muff), Grey Flanger, Transistor Tape, Plateaux, Scream 808.

Which pickup should I use for Comfortably Numb?

Neck pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pink Floyd use on Comfortably Numb?

Guitar: 1969 Fender Stratocaster (alder body, late-'70s Charvel birdseye maple neck). Amp: Hiwatt DR103 100-watt head (studio, parallel with Yamaha RA-200 rotating speaker cabinet).

Will these settings work with my guitar?

These settings were adapted for a Fender Telecaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 POD Go / POD Go Wireless

All 65 songs for the Line 6 POD Go / POD Go Wireless →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.