ToneAdapt

Loading...

Line 6 POD Go / POD Go Wireless settings

Crossroads settings for Line 6 POD Go / POD Go Wireless

Cream · adapted 17 times on ToneAdapt

To get the Cream "Crossroads" solo tone on a Line 6 POD Go / POD Go Wireless, use the Brit J45 Nrm (Marshall JTM45, normal channel) amp model on the crunch channel, then set Drive 6, Master 7, Bass 8, Mid 8, Treble 7, Presence 7. Use the bridge pickup with your guitar's tone on 1 and volume on 10.

Solo settings

Adapted for a Epiphone Les Paul · updated 2026-10-20

Amp model
Brit J45 Nrm (Marshall JTM45, normal channel)
Channel
Crunch
Cab
4x12 cabinet with Greenbacks
Pickup
Bridge pickup
Guitar knobs
Tone 1 · Volume 10

Amp block

Drive
6
Master
7
Bass
8
Mid
8
Treble
7
Presence
7
Original drive
6

Effects chain

  1. 1overdriveScream 808 (Ibanez TS808 Tube Screamer)Gain 5 · Tone 5 · Level 7
  2. 2reverb'63 SpringMix 3 · Decay 4
  3. 3fuzzArbitrator Fuzz (Arbiter Fuzz Face)Fuzz 5 · Tone 5 · Level 7

Playing tips

  • Focus on dynamic phrasing to capture the expressive blues style.
  • Use fingerstyle or a light pick attack for a warmer tone.
  • Incorporate bends and vibrato to enhance the singing quality of the notes.

The original rig

What Cream used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 POD Go / POD Go Wireless actually has.

Guitar
1964 Gibson SG Standard (aka 'The Fool' SG, hand-painted, stock PAF humbuckers)
Amp
Marshall JTM45 100-watt 'Super 100' (Marshall 'plexi', KT66 tubes, 4x12 cabinet with Celestion speakers)
Gain
6.5
Bass
6.5
Mid
7
Treble
7
Presence
6
Reverb
0
Full Crossroads tone breakdown, effects and sources →

Different guitar or pedals? Get Crossroads adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Cream's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Line 6 POD Go / POD Go Wireless for Crossroads?

Use the Brit J45 Nrm (Marshall JTM45, normal channel) (crunch channel) with Drive 6, Master 7, Bass 8, Mid 8, Treble 7, Presence 7, followed by Scream 808 (Ibanez TS808 Tube Screamer), '63 Spring, Arbitrator Fuzz (Arbiter Fuzz Face).

Which pickup should I use for Crossroads?

Bridge pickup, with the guitar's tone at 1 and volume at 10.

What gear did Cream use on Crossroads?

Guitar: 1964 Gibson SG Standard (aka 'The Fool' SG, hand-painted, stock PAF humbuckers). Amp: Marshall JTM45 100-watt 'Super 100' (Marshall 'plexi', KT66 tubes, 4x12 cabinet with Celestion speakers).

Will these settings work with my guitar?

These settings were adapted for a Epiphone Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 POD Go / POD Go Wireless

All 65 songs for the Line 6 POD Go / POD Go Wireless →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.