ToneAdapt

Loading...

Line 6 POD Go settings

Iron Man settings for Line 6 POD Go

Black Sabbath · adapted 2 times on ToneAdapt

To get the Black Sabbath "Iron Man" riff tone on a Line 6 POD Go, use the Brit 2203 (Marshall JCM800) amp model on the lead channel, then set Drive 7, Master 7, Bass 7, Mid 7, Treble 6, Presence 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-10.

Riff settings

Adapted for a LTD KH-202 · updated 2026-08-22

Amp model
Brit 2203 (Marshall JCM800)
Channel
Lead
Cab
4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-10

Amp block

Drive
7
Master
7
Bass
7
Mid
7
Treble
6
Presence
5

Effects chain

  1. 1overdriveScream 808Gain 5 · Tone 6 · Level 7
  2. 2noise gateNoise GateRelease 5 · Threshold 5
  3. 3distortionVermin (Rat)Volume 7 · Filter 5 · Distortion 6

Playing tips

  • Use palm muting for tight, percussive chugs.
  • Focus on aggressive attack to emphasize the chunky distortion.
  • Experiment with picking dynamics to enhance the riff's swagger.

The original rig

What Black Sabbath used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 POD Go actually has.

Guitar
1965 Gibson SG Special
Amp
Laney Supergroup MK 1 100-watt head with Laney 4x12 cabinet (Celestion G12-25M speakers likely)
Gain
8
Bass
7.5
Mid
7.5
Treble
6
Presence
5.5
Reverb
0
Full Iron Man tone breakdown, effects and sources →

Different guitar or pedals? Get Iron Man adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Black Sabbath's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Line 6 POD Go for Iron Man?

Use the Brit 2203 (Marshall JCM800) (lead channel) with Drive 7, Master 7, Bass 7, Mid 7, Treble 6, Presence 5, followed by Scream 808, Noise Gate, Vermin (Rat).

Which pickup should I use for Iron Man?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-10.

What gear did Black Sabbath use on Iron Man?

Guitar: 1965 Gibson SG Special. Amp: Laney Supergroup MK 1 100-watt head with Laney 4x12 cabinet (Celestion G12-25M speakers likely).

Will these settings work with my guitar?

These settings were adapted for a LTD KH-202. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 POD Go

All 38 songs for the Line 6 POD Go →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.