ToneAdapt

Loading...

Line 6 Spider III settings

Back in Black settings for Line 6 Spider III

AC/DC · adapted 6 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a Line 6 Spider III, select the Crunch preset, then set Gain 4, Bass 5, Mid 6, Treble 5, Reverb 0, Boost 0. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Jackson Dinky · updated 2026-07-30

Preset / mode
Crunch
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Line 6 Spider III knobs

Gain
4
Bass
5
Mid
6
Treble
5
Reverb
0
Boost
0
FX Knob 1
0
FX Knob 2
0
Noise Gate
1
Tap Delay Time
0

Playing tips

  • Focus on a tight picking attack to enhance the percussive quality of the riff.
  • Use palm muting selectively for added punch on the lower strings.
  • Experiment with dynamics; play softer for cleaner notes and harder for a more aggressive sound.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Line 6 Spider III actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Line 6 Spider III for Back in Black?

Start from the Crunch preset, then set Gain 4, Bass 5, Mid 6, Treble 5, Reverb 0, Boost 0.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Jackson Dinky. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Line 6 Spider III

All 45 songs for the Line 6 Spider III →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.