ToneAdapt

Loading...

M-Vave MK-300 settings

Master of Puppets settings for M-Vave MK-300

Metallica · adapted 24 times on ToneAdapt

To get the Metallica "Master of Puppets" riff tone on a M-Vave MK-300, use the EVH 5150 amp model on the lead channel, then set Drive 8, Master 7, Bass 6, Mid 2, Treble 8, Presence 6. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

updated 2026-11-09

Amp model
EVH 5150
Channel
Lead
Cab
4x12 cabinet
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
8
Master
7
Bass
6
Mid
2
Treble
8
Presence
6
Original drive
8

Effects chain

  1. 1overdriveBoostGain 8 · Level 10
  2. 2noise gateNoise GateRelease 3 · Threshold 5
  3. 3reverbSpring ReverbMix 2 · Decay 2
  4. 4distortionMetal DistortionGain 8 · Tone 6 · Level 10

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use fast alternate picking for aggressive articulation.
  • Maintain a steady rhythm to emphasize the percussive nature of the riff.

The original rig

What Metallica used on the recording, for reference. ToneAdapt translates this to the controls your M-Vave MK-300 actually has.

Guitar
ESP MX220 (custom, aka 'Eet Fuk')
Amp
Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet
Gain
9
Bass
6
Mid
3
Treble
7.5
Presence
6.5
Reverb
1
Full Master of Puppets tone breakdown, effects and sources →

Different guitar or pedals? Get Master of Puppets adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Metallica's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the M-Vave MK-300 for Master of Puppets?

Use the EVH 5150 (lead channel) with Drive 8, Master 7, Bass 6, Mid 2, Treble 8, Presence 6, followed by Boost, Noise Gate, Spring Reverb, Metal Distortion.

Which pickup should I use for Master of Puppets?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Metallica use on Master of Puppets?

Guitar: ESP MX220 (custom, aka 'Eet Fuk'). Amp: Mesa/Boogie Mark IIC+ (preamp) into Marshall JCM800 (power amp section), Mesa 4x12 cabinet.

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the M-Vave MK-300

All 33 songs for the M-Vave MK-300 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.