ToneAdapt

Loading...

Marshall AVT150 Valvestate 2000 settings

Man in the Box settings for Marshall AVT150 Valvestate 2000

Alice in Chains · adapted 2 times on ToneAdapt

To get the Alice in Chains "Man in the Box" riff tone on a Marshall AVT150 Valvestate 2000, set Gain 7.5, Bass 5, Mid 6.5, Treble 7, Presence 6, Reverb 0.5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Epiphone SG Standard · updated 2026-06-30

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall AVT150 Valvestate 2000 knobs

Gain
7.5
Bass
5
Mid
6.5
Treble
7
Presence
6
Reverb
0.5
Bright switch
0
Dfx mix od1 od2
0
Od1 scoop switch
0
Od2 scoop switch
1
Dfx adjust od1 od2
0
Dfx program od1 od2
0
Dfx mix clean acoustic
0
Dfx adjust clean acoustic
0
Dfx program clean acoustic
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use palm muting for tight chugging riffs.
  • Focus on aggressive picking for percussive attack.
  • Maintain a steady rhythm to emphasize the crunch.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Marshall AVT150 Valvestate 2000 actually has.

Guitar
G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo)
Amp
Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era)
Gain
7.5
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
1.5
Full Man in the Box tone breakdown, effects and sources →

Different guitar or pedals? Get Man in the Box adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall AVT150 Valvestate 2000 settings for Man in the Box?

Set Gain 7.5, Bass 5, Mid 6.5, Treble 7, Presence 6, Reverb 0.5.

Which pickup should I use for Man in the Box?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Alice in Chains use on Man in the Box?

Guitar: G&L Rampage (1984, maple neck, single humbucker, Kahler tremolo). Amp: Bogner-modified Marshall JCM800 (studio recording, 1990/91, 'Dirt' album era).

Will these settings work with my guitar?

These settings were adapted for a Epiphone SG Standard. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall AVT150 Valvestate 2000

All 11 songs for the Marshall AVT150 Valvestate 2000 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.