ToneAdapt

Loading...

Marshall Code 50 settings

Breathe (In the Air) settings for Marshall Code 50

Pink Floyd · adapted 2 times on ToneAdapt

To get the Pink Floyd "Breathe (In the Air)" solo tone on a Marshall Code 50, select the Bluesbreaker preset, then set Gain 3.5, Bass 5, Mid 6, Treble 6, Presence 5, Reverb 4. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Solo settings

Adapted for a Ibanez RG320 · updated 2026-06-06

Preset / mode
Bluesbreaker
Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall Code 50 knobs

Gain
3.5
Bass
5
Mid
6
Treble
6
Presence
5
Reverb
4

Built-in effects

  • Reverb on (plate) · 4

Playing tips

  • Use your amp's built-in delay set to 6 for a spacious echo effect.
  • Engage the chorus at 5 to add swirling modulation to your solo.
  • Play with touch-sensitive dynamics to achieve the smooth, expressive phrasing characteristic of Gilmour.

The original rig

What Pink Floyd used on the recording, for reference. ToneAdapt translates this to the controls your Marshall Code 50 actually has.

Guitar
Fender Stratocaster (1969, alder body, maple neck)
Amp
Hiwatt DR103 100-watt head into WEM Super Starfinder 4x12 cabinet
Gain
3
Bass
7
Mid
7
Treble
6.5
Presence
5.5
Reverb
3
Full Breathe (In the Air) tone breakdown, effects and sources →

Different guitar or pedals? Get Breathe (In the Air) adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pink Floyd's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Marshall Code 50 for Breathe (In the Air)?

Start from the Bluesbreaker preset, then set Gain 3.5, Bass 5, Mid 6, Treble 6, Presence 5, Reverb 4.

Which pickup should I use for Breathe (In the Air)?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Pink Floyd use on Breathe (In the Air)?

Guitar: Fender Stratocaster (1969, alder body, maple neck). Amp: Hiwatt DR103 100-watt head into WEM Super Starfinder 4x12 cabinet.

Will these settings work with my guitar?

These settings were adapted for a Ibanez RG320. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall Code 50

All 47 songs for the Marshall Code 50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.