ToneAdapt

Loading...

Marshall Code 50 settings

Kickstart My Heart settings for Marshall Code 50

Mötley Crüe · adapted 2 times on ToneAdapt

To get the Mötley Crüe "Kickstart My Heart" riff tone on a Marshall Code 50, select the Plexi preset, then set Gain 8, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 0.5. Use the bridge pickup with your guitar's tone on 8-10 and volume on 10.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-07-27

Preset / mode
Plexi
Pickup
Bridge pickup
Guitar knobs
Tone 8-10 · Volume 10

Marshall Code 50 knobs

Gain
8
Bass
5
Mid
6
Treble
7
Presence
6
Reverb
0.5

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use tight palm muting on power chords for that percussive attack.
  • Pick aggressively to enhance the articulation of the notes.
  • Keep the amp's reverb low to maintain a dry and punchy sound.

The original rig

What Mötley Crüe used on the recording, for reference. ToneAdapt translates this to the controls your Marshall Code 50 actually has.

Guitar
Kramer Baretta (custom, early 1980s, likely with Floyd Rose tremolo)
Amp
Marshall Super Lead (Plexi) 100-watt head, Jose Arredondo modded (multiple heads from late 60s/early 70s, blended with Hiwatt and Garnet for low end)
Gain
8
Bass
6
Mid
5
Treble
7.5
Presence
7
Reverb
1.5
Full Kickstart My Heart tone breakdown, effects and sources →

Different guitar or pedals? Get Kickstart My Heart adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Mötley Crüe's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Marshall Code 50 for Kickstart My Heart?

Start from the Plexi preset, then set Gain 8, Bass 5, Mid 6, Treble 7, Presence 6, Reverb 0.5.

Which pickup should I use for Kickstart My Heart?

Bridge pickup, with the guitar's tone at 8-10 and volume at 10.

What gear did Mötley Crüe use on Kickstart My Heart?

Guitar: Kramer Baretta (custom, early 1980s, likely with Floyd Rose tremolo). Amp: Marshall Super Lead (Plexi) 100-watt head, Jose Arredondo modded (multiple heads from late 60s/early 70s, blended with Hiwatt and Garnet for low end).

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall Code 50

All 47 songs for the Marshall Code 50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.