ToneAdapt

Loading...

Marshall CODE50 settings

Walk settings for Marshall CODE50

Pantera · adapted 7 times on ToneAdapt

To get the Pantera "Walk" riff tone on a Marshall CODE50, select the DSL OD preset, then set Gain 8.5, Volume 7, Master 5, Bass 6, Mid 2, Treble 7.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Ibanez GIO GRGR131EX · updated 2026-10-14

Preset / mode
DSL OD
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Marshall CODE50 knobs

Gain
8.5
Volume
7
Master
5
Bass
6
Mid
2
Treble
7.5
Presence
6
Reverb
0
Mod fx
0
Pre fx
0
Delay fx
0
Reverb fx
0
Edit button
0
Preset selector
4
Amp model selector
0
Cabinet model selector
0
Power amp model selector
0

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use a sharp pick attack to enhance the percussive quality.
  • Maintain a steady rhythm to keep the aggressive attack consistent.

The original rig

What Pantera used on the recording, for reference. ToneAdapt translates this to the controls your Marshall CODE50 actually has.

Guitar
Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power)
Amp
Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers)
Gain
8.5
Bass
6
Mid
3.5
Treble
7.5
Presence
7
Reverb
0
Full Walk tone breakdown, effects and sources →

Different guitar or pedals? Get Walk adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Pantera's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What preset should I use on the Marshall CODE50 for Walk?

Start from the DSL OD preset, then set Gain 8.5, Volume 7, Master 5, Bass 6, Mid 2, Treble 7.5.

Which pickup should I use for Walk?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Pantera use on Walk?

Guitar: Dean ML (likely 1981 Dean ML Standard, as used by Dimebag Darrell on Vulgar Display of Power). Amp: Randall RG-100ES solid-state head into Randall 4x12 cabinet (likely with Celestion G12-65 speakers).

Will these settings work with my guitar?

These settings were adapted for a Ibanez GIO GRGR131EX. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall CODE50

All 16 songs for the Marshall CODE50 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.