ToneAdapt

Loading...

Marshall DSL40C settings

Pride and Joy settings for Marshall DSL40C

Stevie Ray Vaughan · adapted 5 times on ToneAdapt

To get the Stevie Ray Vaughan "Pride and Joy" riff tone on a Marshall DSL40C, set Gain 4, Bass 5, Mid 6, Treble 6, Presence 5, Resonance 4. Use the bridge + middle pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Yamaha Pacifica 012 · updated 2026-08-21

Pickup
Bridge + Middle
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall DSL40C knobs

Gain
4
Bass
5
Mid
6
Treble
6
Presence
5
Resonance
4
Reverb
1
Tone shift
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in reverb set to a moderate level to recreate the spacious feel of the original tone.
  • Maintain a light touch for a dynamic, percussive attack characteristic of the Texas shuffle feel.
  • Experiment with picking dynamics to achieve the touch-sensitive response of the original tone.

The original rig

What Stevie Ray Vaughan used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL40C actually has.

Guitar
1963 Fender Stratocaster 'Number One'
Amp
1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio)
Gain
4
Bass
7
Mid
7
Treble
6
Presence
5.5
Reverb
3
Full Pride and Joy tone breakdown, effects and sources →

Different guitar or pedals? Get Pride and Joy adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Stevie Ray Vaughan's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL40C settings for Pride and Joy?

Set Gain 4, Bass 5, Mid 6, Treble 6, Presence 5, Resonance 4.

Which pickup should I use for Pride and Joy?

Bridge + Middle, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Stevie Ray Vaughan use on Pride and Joy?

Guitar: 1963 Fender Stratocaster 'Number One'. Amp: 1964 Fender Vibroverb (2x12), 1980 Marshall 4140 Club & Country (used for clean headroom, blended in studio).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Pacifica 012. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall DSL40C

All 44 songs for the Marshall DSL40C →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.