ToneAdapt

Loading...

Marshall DSL40CR settings

Hallowed Be Thy Name (1982 Remaster) settings for Marshall DSL40CR

Iron Maiden · adapted 2 times on ToneAdapt

To get the Iron Maiden "Hallowed Be Thy Name (1982 Remaster)" riff tone on a Marshall DSL40CR, set Gain 7, Bass 5, Mid 7, Treble 7, Presence 6, Resonance 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Jackson SLX DX Soloist · updated 2026-05-30

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall DSL40CR knobs

Gain
7
Bass
5
Mid
7
Treble
7
Presence
6
Resonance
5
Reverb
1.5
Tone shift
0

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in reverb set to a low level to recreate the spacious feel of the original tone.
  • Maintain a strong palm muting technique for tight, punchy riffs.
  • Focus on precise picking to capture the clarity of the riff.

The original rig

What Iron Maiden used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL40CR actually has.

Guitar
Fender Stratocaster (Dave Murray's 1970s model, likely with DiMarzio Super Distortion bridge pickup)
Amp
Marshall JMP 2203 (100w) or Marshall 1959 Super Lead (100w), with Marshall cabinets (Celestion and EV speakers)
Gain
7
Bass
5.5
Mid
7
Treble
7
Presence
6.5
Reverb
1.5
Full Hallowed Be Thy Name (1982 Remaster) tone breakdown, effects and sources →

Different guitar or pedals? Get Hallowed Be Thy Name (1982 Remaster) adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Iron Maiden's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL40CR settings for Hallowed Be Thy Name (1982 Remaster)?

Set Gain 7, Bass 5, Mid 7, Treble 7, Presence 6, Resonance 5.

Which pickup should I use for Hallowed Be Thy Name (1982 Remaster)?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Iron Maiden use on Hallowed Be Thy Name (1982 Remaster)?

Guitar: Fender Stratocaster (Dave Murray's 1970s model, likely with DiMarzio Super Distortion bridge pickup). Amp: Marshall JMP 2203 (100w) or Marshall 1959 Super Lead (100w), with Marshall cabinets (Celestion and EV speakers).

Will these settings work with my guitar?

These settings were adapted for a Jackson SLX DX Soloist. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall DSL40CR

All 153 songs for the Marshall DSL40CR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.