ToneAdapt

Loading...

Marshall DSL40CR settings

Unchain the Night settings for Marshall DSL40CR

Dokken · adapted 2 times on ToneAdapt

To get the Dokken "Unchain the Night" riff tone on a Marshall DSL40CR, set Gain 7.5, Bass 5, Mid 5, Treble 7, Presence 6.5, Resonance 6. Use the bridge pickup with your guitar's tone on 8 and volume on 8-9.

Riff settings

Adapted for a Schecter C-1 SLS Evil Twin · updated 2026-05-24

Pickup
Bridge pickup
Guitar knobs
Tone 8 · Volume 8-9

Marshall DSL40CR knobs

Gain
7.5
Bass
5
Mid
5
Treble
7
Presence
6.5
Resonance
6
Reverb
0.5
Tone shift
0

Built-in effects

  • Reverb on (spring) · 2

Playing tips

  • Use tight palm muting for chugging riffs to capture the aggressive attack.
  • Focus on articulate note separation to maintain clarity in high-gain settings.
  • Experiment with the amp's built-in reverb to add a slight spacious feel to the tone.

The original rig

What Dokken used on the recording, for reference. ToneAdapt translates this to the controls your Marshall DSL40CR actually has.

Guitar
ESP Kamikaze (George Lynch signature, 1985-86, maple body, Floyd Rose, single humbucker)
Amp
Marshall JCM800 2203 (100W head, likely modded, used in studio for 'Under Lock and Key')
Gain
7.5
Bass
5.5
Mid
5
Treble
7
Presence
6.5
Reverb
1.5
Full Unchain the Night tone breakdown, effects and sources →

Different guitar or pedals? Get Unchain the Night adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Dokken's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall DSL40CR settings for Unchain the Night?

Set Gain 7.5, Bass 5, Mid 5, Treble 7, Presence 6.5, Resonance 6.

Which pickup should I use for Unchain the Night?

Bridge pickup, with the guitar's tone at 8 and volume at 8-9.

What gear did Dokken use on Unchain the Night?

Guitar: ESP Kamikaze (George Lynch signature, 1985-86, maple body, Floyd Rose, single humbucker). Amp: Marshall JCM800 2203 (100W head, likely modded, used in studio for 'Under Lock and Key').

Will these settings work with my guitar?

These settings were adapted for a Schecter C-1 SLS Evil Twin. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Unchain the Night on other amps

More Dokken on the Marshall DSL40CR

All Dokken tones →

Popular songs on the Marshall DSL40CR

All 153 songs for the Marshall DSL40CR →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.