ToneAdapt

Loading...

Marshall MG10 settings

Creep settings for Marshall MG10

Radiohead · adapted 6 times on ToneAdapt

To get the Radiohead "Creep" riff tone on a Marshall MG10, set Gain 7, Contour 5, Clean volume 0, Overdrive volume 7. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Fender Stratocaster · updated 2026-11-11

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall MG10 knobs

Gain
7
Contour
5
Clean volume
0
Overdrive volume
7

Built-in effects

  • Reverb off

Playing tips

  • Use a tight picking technique for percussive attack.
  • Palm mute the lower strings for chugging sections.
  • Focus on aggressive downstrokes for power chords.

The original rig

What Radiohead used on the recording, for reference. ToneAdapt translates this to the controls your Marshall MG10 actually has.

Guitar
Fender Telecaster (Jonny Greenwood's main guitar on 'Creep')
Amp
Mesa/Boogie Dual Rectifier Trem-O-Verb Combo Amp
Gain
7
Bass
6
Mid
7
Treble
7
Presence
6
Reverb
2
Full Creep tone breakdown, effects and sources →

Different guitar or pedals? Get Creep adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Radiohead's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall MG10 settings for Creep?

Set Gain 7, Contour 5, Clean volume 0, Overdrive volume 7.

Which pickup should I use for Creep?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Radiohead use on Creep?

Guitar: Fender Telecaster (Jonny Greenwood's main guitar on 'Creep'). Amp: Mesa/Boogie Dual Rectifier Trem-O-Verb Combo Amp.

Will these settings work with my guitar?

These settings were adapted for a Fender Stratocaster. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall MG10

All 38 songs for the Marshall MG10 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.