ToneAdapt

Loading...

Marshall MG10 settings

It Is Not Meant to Be settings for Marshall MG10

Tame Impala · adapted 2 times on ToneAdapt

To get the Tame Impala "It Is Not Meant to Be" solo tone on a Marshall MG10, set Gain 4, Contour 5, Clean volume 6, Overdrive volume 0. Use the neck pickup with your guitar's tone on 5-6 and volume on 8-9.

Solo settings

Adapted for a Yamaha Pacifica 112V · updated 2026-10-08

Pickup
Neck pickup
Guitar knobs
Tone 5-6 · Volume 8-9

Marshall MG10 knobs

Gain
4
Contour
5
Clean volume
6
Overdrive volume
0

Built-in effects

  • Reverb off

Playing tips

  • Use light fingerpicking to achieve a delicate touch.
  • Incorporate subtle bends for expressive lead lines.
  • Experiment with dynamics by varying pick attack.

Riff settings

Adapted for a Yamaha Pacifica 112V · updated 2026-10-08

Pickup
Bridge pickup
Guitar knobs
Tone 6-7 · Volume 8-9

Marshall MG10 knobs

Gain
3.5
Contour
5
Clean volume
6
Overdrive volume
0

Built-in effects

  • Reverb off

Playing tips

  • Use a soft attack to maintain clarity and warmth.
  • Experiment with subtle finger vibrato for a dreamy effect.
  • Incorporate slight palm muting for a more defined riff sound.

The original rig

What Tame Impala used on the recording, for reference. ToneAdapt translates this to the controls your Marshall MG10 actually has.

Guitar
Fender Roadhouse Stratocaster (2000s Mexican, stock pickups)
Amp
Vox AC30 (likely 2000s reissue, studio recording)
Gain
3.5
Bass
6.5
Mid
6.5
Treble
6.5
Presence
5.5
Reverb
5
Full It Is Not Meant to Be tone breakdown, effects and sources →

Different guitar or pedals? Get It Is Not Meant to Be adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Tame Impala's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall MG10 settings for It Is Not Meant to Be?

Set Gain 4, Contour 5, Clean volume 6, Overdrive volume 0.

Which pickup should I use for It Is Not Meant to Be?

Neck pickup, with the guitar's tone at 5-6 and volume at 8-9.

What gear did Tame Impala use on It Is Not Meant to Be?

Guitar: Fender Roadhouse Stratocaster (2000s Mexican, stock pickups). Amp: Vox AC30 (likely 2000s reissue, studio recording).

Will these settings work with my guitar?

These settings were adapted for a Yamaha Pacifica 112V. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall MG10

All 38 songs for the Marshall MG10 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.