ToneAdapt

Loading...

Marshall MG100HDFX settings

Back in Black settings for Marshall MG100HDFX

AC/DC · adapted 4 times on ToneAdapt

To get the AC/DC "Back in Black" riff tone on a Marshall MG100HDFX, set Gain 2, Contour 0, Od bass 0, Od gain 0, Fx level 0, Fx adjust 5. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Gibson SG · updated 2026-11-03

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall MG100HDFX knobs

Gain
2
Contour
0
Od bass
0
Od gain
0
Fx level
0
Fx adjust
5
Od middle
0
Od treble
0
Od volume
0
Clean bass
5
Clean gain
4.5
Fx loop mix
5
Clean middle
6
Clean treble
5
Clean volume
5
Reverb level
3
Master volume
5
Od1 od2 switch
0
Clean crunch switch
0

Playing tips

  • Use a tight picking attack for a percussive sound.
  • Palm mute the lower strings for added definition during the riff.
  • Experiment with dynamics; play softer for clean chord definitions, harder for crunch.

The original rig

What AC/DC used on the recording, for reference. ToneAdapt translates this to the controls your Marshall MG100HDFX actually has.

Guitar
Gibson SG Standard (1970s, likely '69-'73, stock humbuckers)
Amp
Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers)
Gain
4
Bass
4
Mid
7.5
Treble
4.5
Presence
5.5
Reverb
0
Full Back in Black tone breakdown, effects and sources →

Different guitar or pedals? Get Back in Black adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts AC/DC's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall MG100HDFX settings for Back in Black?

Set Gain 2, Contour 0, Od bass 0, Od gain 0, Fx level 0, Fx adjust 5.

Which pickup should I use for Back in Black?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did AC/DC use on Back in Black?

Guitar: Gibson SG Standard (1970s, likely '69-'73, stock humbuckers). Amp: Marshall 1959 Super Lead 100-watt Plexi (1970s, 4-input, non-master volume, into Marshall 4x12 cabinet with Celestion G12M Greenback speakers).

Will these settings work with my guitar?

These settings were adapted for a Gibson SG. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall MG100HDFX

All 62 songs for the Marshall MG100HDFX →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.