ToneAdapt

Loading...

Marshall MG100HDFX settings

In My Dreams settings for Marshall MG100HDFX

Dokken · adapted 2 times on ToneAdapt

To get the Dokken "In My Dreams" solo tone on a Marshall MG100HDFX, set Gain 5.5, Contour 0, Od bass 0, Od gain 0, Fx level 0, Fx adjust 5. Use the neck pickup with your guitar's tone on 7-8 and volume on 8-9.

Solo settings

Adapted for a Jackson JS Series Dinky Arch Top JS22 DKA · updated 2026-04-07

Pickup
Neck pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall MG100HDFX knobs

Gain
5.5
Contour
0
Od bass
0
Od gain
0
Fx level
0
Fx adjust
5
Od middle
0
Od treble
0
Od volume
0
Clean bass
5
Clean gain
5
Fx loop mix
5
Clean middle
6
Clean treble
6
Clean volume
5
Reverb level
1
Master volume
5
Od1 od2 switch
0
Clean crunch switch
1

Built-in effects

  • Delay on
  • Reverb on (spring) · 2

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the overdrive mode (OD1) for a thicker, more saturated lead tone.
  • Keep the gain high to ensure sustain and clarity during the solo.

Riff settings

Adapted for a Jackson JS Series Dinky Arch Top JS22 DKA · updated 2026-04-01

Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Marshall MG100HDFX knobs

Gain
5.5
Contour
0
Od bass
0
Od gain
0
Fx level
0
Fx adjust
5
Od middle
0
Od treble
0
Od volume
0
Clean bass
5
Clean gain
5
Fx loop mix
5
Clean middle
6
Clean treble
6
Clean volume
5
Reverb level
1
Master volume
5
Od1 od2 switch
0
Clean crunch switch
1

Built-in effects

  • Reverb off

Playing tips

  • Use your amp's built-in reverb set to a moderate level to add depth to the riff.
  • Keep your picking hand relaxed for a smoother attack on the strings.
  • Experiment with palm muting during the riff to create a tighter sound.

The original rig

What Dokken used on the recording, for reference. ToneAdapt translates this to the controls your Marshall MG100HDFX actually has.

Guitar
ESP Kamikaze (George Lynch signature, custom shop, 1985-86 era)
Amp
Marshall JCM800 2203 (100W, likely modded, 1980s)
Gain
7.5
Bass
6
Mid
5.5
Treble
7
Presence
6.5
Reverb
1.5
Full In My Dreams tone breakdown, effects and sources →

Different guitar or pedals? Get In My Dreams adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Dokken's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall MG100HDFX settings for In My Dreams?

Set Gain 5.5, Contour 0, Od bass 0, Od gain 0, Fx level 0, Fx adjust 5.

Which pickup should I use for In My Dreams?

Neck pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Dokken use on In My Dreams?

Guitar: ESP Kamikaze (George Lynch signature, custom shop, 1985-86 era). Amp: Marshall JCM800 2203 (100W, likely modded, 1980s).

Will these settings work with my guitar?

These settings were adapted for a Jackson JS Series Dinky Arch Top JS22 DKA. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall MG100HDFX

All 62 songs for the Marshall MG100HDFX →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.