ToneAdapt

Loading...

Marshall MG100HDFX settings

Nightmare settings for Marshall MG100HDFX

Avenged Sevenfold · adapted 2 times on ToneAdapt

To get the Avenged Sevenfold "Nightmare" solo tone on a Marshall MG100HDFX, set Gain 7, Contour 6, Od bass 5, Od gain 7, Fx level 0, Fx adjust 5. Use the bridge pickup with your guitar's tone on 8-10 and volume on 10.

Solo settings

Adapted for a Harley Benton CST-24 · updated 2026-10-13

Pickup
Bridge pickup
Guitar knobs
Tone 8-10 · Volume 10

Marshall MG100HDFX knobs

Gain
7
Contour
6
Od bass
5
Od gain
7
Fx level
0
Fx adjust
5
Od middle
4.5
Od treble
8
Od volume
6
Clean bass
0
Clean gain
0
Fx loop mix
5
Clean middle
0
Clean treble
0
Clean volume
0
Reverb level
1
Master volume
7
Od1 od2 switch
1
Clean crunch switch
0

Built-in effects

  • Delay on
  • Reverb on (Digital) · 1

Playing tips

  • Use your amp's built-in delay set to a moderate level to recreate the spacious feel of the original tone.
  • Engage the overdrive mode for a more saturated lead tone.
  • Utilize palm muting for tight, percussive runs during the solo.

The original rig

What Avenged Sevenfold used on the recording, for reference. ToneAdapt translates this to the controls your Marshall MG100HDFX actually has.

Guitar
Schecter Synyster Gates Custom
Amp
Bogner Uberschall 120-Watt Tube Guitar Amp Head
Gain
8.5
Bass
6
Mid
4.5
Treble
7
Presence
6.5
Reverb
1.5
Full Nightmare tone breakdown, effects and sources →

Different guitar or pedals? Get Nightmare adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Avenged Sevenfold's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall MG100HDFX settings for Nightmare?

Set Gain 7, Contour 6, Od bass 5, Od gain 7, Fx level 0, Fx adjust 5.

Which pickup should I use for Nightmare?

Bridge pickup, with the guitar's tone at 8-10 and volume at 10.

What gear did Avenged Sevenfold use on Nightmare?

Guitar: Schecter Synyster Gates Custom. Amp: Bogner Uberschall 120-Watt Tube Guitar Amp Head.

Will these settings work with my guitar?

These settings were adapted for a Harley Benton CST-24. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall MG100HDFX

All 62 songs for the Marshall MG100HDFX →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.