ToneAdapt

Loading...

Marshall MG10CD settings

Mr. Brightside settings for Marshall MG10CD

The Killers · adapted 3 times on ToneAdapt

To get the The Killers "Mr. Brightside" riff tone on a Marshall MG10CD, set Gain 4.5, Contour 7, Clean volume 6, Overdrive gain 0, Overdrive volume 0. Use the bridge pickup with your guitar's tone on 8 and volume on 8-9.

Riff settings

updated 2026-11-06

Pickup
Bridge pickup
Guitar knobs
Tone 8 · Volume 8-9

Marshall MG10CD knobs

Gain
4.5
Contour
7
Clean volume
6
Overdrive gain
0
Overdrive volume
0

Built-in effects

  • Reverb off

Playing tips

  • Use a light touch to maintain clarity and articulation.
  • Incorporate subtle palm muting for a tighter sound during the riff.
  • Experiment with picking dynamics to enhance the edge character.

The original rig

What The Killers used on the recording, for reference. ToneAdapt translates this to the controls your Marshall MG10CD actually has.

Guitar
Fender Stratocaster (likely American Standard, early 2000s, as used by Dave Keuning on the studio recording)
Amp
Fender Hot Rod DeVille (studio recording, 2003 era; Fender-style amp confirmed by multiple sources)
Gain
4.5
Bass
4.5
Mid
7
Treble
8
Presence
6
Reverb
5
Full Mr. Brightside tone breakdown, effects and sources →

Different guitar or pedals? Get Mr. Brightside adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts The Killers's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What are the best Marshall MG10CD settings for Mr. Brightside?

Set Gain 4.5, Contour 7, Clean volume 6, Overdrive gain 0, Overdrive volume 0.

Which pickup should I use for Mr. Brightside?

Bridge pickup, with the guitar's tone at 8 and volume at 8-9.

What gear did The Killers use on Mr. Brightside?

Guitar: Fender Stratocaster (likely American Standard, early 2000s, as used by Dave Keuning on the studio recording). Amp: Fender Hot Rod DeVille (studio recording, 2003 era; Fender-style amp confirmed by multiple sources).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Marshall MG10CD

All 20 songs for the Marshall MG10CD →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.