ToneAdapt

Loading...

Neural DSP Quad Cortex settings

Mam Na Teba Chut settings for Neural DSP Quad Cortex

Team · adapted 2 times on ToneAdapt

To get the Team "Mam Na Teba Chut" solo tone on a Neural DSP Quad Cortex, use the Brit 2203 (Marshall JCM800) amp model on the crunch channel, then set Drive 6, Master 7, Bass 6, Mid 7, Treble 6.5, Presence 6. Use the neck pickup with your guitar's tone on 6-7 and volume on 8-9.

Solo settings

updated 2026-10-05

Amp model
Brit 2203 (Marshall JCM800)
Channel
Crunch
Cab
4x12 Closed Back
Pickup
Neck pickup
Guitar knobs
Tone 6-7 · Volume 8-9

Amp block

Drive
6
Master
7
Bass
6
Mid
7
Treble
6.5
Presence
6

Effects chain

  1. 1overdriveGreen 808 (Ibanez TS808)Gain 4 · Tone 5 · Level 7
  2. 2delayAnalog DelayMix 4 · Time 3.8 · Feedback 5
  3. 3reverbSpring Reverb Engine (M)Mix 4 · Decay 4.5

Playing tips

  • Focus on smooth, melodic phrasing to match the original solo style.
  • Use dynamic picking to enhance note separation and clarity.
  • Incorporate slight bends to achieve the singing sustain characteristic.

Riff settings

updated 2026-10-05

Amp model
Brit 2203 (Marshall JCM800)
Channel
Crunch
Cab
4x12 Closed Back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
6
Master
7
Bass
6
Mid
6.5
Treble
7
Presence
6

Effects chain

  1. 1overdriveChief SD1 (BOSS SD-1)Gain 4 · Tone 5 · Level 7
  2. 2reverbSpring Reverb Engine (M)Mix 4 · Decay 3

Playing tips

  • Focus on tight, rhythmic strumming to achieve the punchy attack.
  • Use palm muting selectively to accentuate the crunch during transitions.
  • Maintain a consistent picking attack for clear note separation in chords.

The original rig

What Team used on the recording, for reference. ToneAdapt translates this to the controls your Neural DSP Quad Cortex actually has.

Guitar
Unknown (likely superstrat or Strat-style electric, exact model not confirmed for this recording)
Amp
Unknown (likely Marshall or similar British-style amp, exact model not confirmed for this recording)
Gain
6
Bass
6
Mid
6.5
Treble
7
Presence
6
Reverb
3
Full Mam Na Teba Chut tone breakdown, effects and sources →

Different guitar or pedals? Get Mam Na Teba Chut adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Team's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Neural DSP Quad Cortex for Mam Na Teba Chut?

Use the Brit 2203 (Marshall JCM800) (crunch channel) with Drive 6, Master 7, Bass 6, Mid 7, Treble 6.5, Presence 6, followed by Green 808 (Ibanez TS808), Analog Delay, Spring Reverb Engine (M).

Which pickup should I use for Mam Na Teba Chut?

Neck pickup, with the guitar's tone at 6-7 and volume at 8-9.

What gear did Team use on Mam Na Teba Chut?

Guitar: Unknown (likely superstrat or Strat-style electric, exact model not confirmed for this recording). Amp: Unknown (likely Marshall or similar British-style amp, exact model not confirmed for this recording).

Will these settings work with my guitar?

Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Neural DSP Quad Cortex

All 67 songs for the Neural DSP Quad Cortex →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.