ToneAdapt

Loading...

Neural DSP Quad Cortex settings

Rooster settings for Neural DSP Quad Cortex

Alice in Chains · adapted 9 times on ToneAdapt

To get the Alice in Chains "Rooster" riff tone on a Neural DSP Quad Cortex, use the Brit 2203 (Marshall JCM800) amp model on the crunch channel, then set Drive 7, Master 7, Bass 6, Mid 7, Treble 7, Presence 5.5. Use the bridge pickup with your guitar's tone on 10 and volume on 10.

Riff settings

Adapted for a Gibson Les Paul · updated 2026-10-30

Amp model
Brit 2203 (Marshall JCM800)
Channel
Crunch
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 10 · Volume 10

Amp block

Drive
7
Master
7
Bass
6
Mid
7
Treble
7
Presence
5.5

Effects chain

  1. 1overdriveGreen 808 (Ibanez TS808)Gain 5 · Tone 5 · Level 7
  2. 2reverbRoomMix 2 · Decay 2
  3. 3compressionChief CS3 (BOSS CS-3 Compression Sustainer)Level 5 · Sustain 5
  4. 4noise gateAdaptive GateRelease 5 · Threshold 3

Playing tips

  • Use aggressive palm muting to achieve a tight, percussive chug.
  • Focus on a strong attack with your picking hand for articulation.
  • Experiment with feedback to enhance sustain and presence in your riffs.

The original rig

What Alice in Chains used on the recording, for reference. ToneAdapt translates this to the controls your Neural DSP Quad Cortex actually has.

Guitar
G&L Rampage (Jerry Cantrell's main guitar on Dirt album)
Amp
Bogner Fish preamp into VHT 2150 power amp (studio recording, Dirt era)
Gain
7
Bass
6
Mid
7
Treble
7
Presence
5.5
Reverb
2
Full Rooster tone breakdown, effects and sources →

Different guitar or pedals? Get Rooster adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Alice in Chains's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the Neural DSP Quad Cortex for Rooster?

Use the Brit 2203 (Marshall JCM800) (crunch channel) with Drive 7, Master 7, Bass 6, Mid 7, Treble 7, Presence 5.5, followed by Green 808 (Ibanez TS808), Room, Chief CS3 (BOSS CS-3 Compression Sustainer), Adaptive Gate.

Which pickup should I use for Rooster?

Bridge pickup, with the guitar's tone at 10 and volume at 10.

What gear did Alice in Chains use on Rooster?

Guitar: G&L Rampage (Jerry Cantrell's main guitar on Dirt album). Amp: Bogner Fish preamp into VHT 2150 power amp (studio recording, Dirt era).

Will these settings work with my guitar?

These settings were adapted for a Gibson Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the Neural DSP Quad Cortex

All 67 songs for the Neural DSP Quad Cortex →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.