ToneAdapt

Loading...

NUX MG-100 settings

Raining Blood settings for NUX MG-100

Slayer · adapted 3 times on ToneAdapt

To get the Slayer "Raining Blood" riff tone on a NUX MG-100, use the BRITISH LEAD (MARSHALL JCM800) amp model on the lead channel, then set Drive 8, Master 7, Bass 5, Mid 5, Treble 7, Presence 7. Use the bridge pickup with your guitar's tone on 7-8 and volume on 8-9.

Riff settings

Adapted for a Gibson Les Paul · updated 2026-11-04

Amp model
BRITISH LEAD (MARSHALL JCM800)
Channel
Lead
Cab
4x12 closed back
Pickup
Bridge pickup
Guitar knobs
Tone 7-8 · Volume 8-9

Amp block

Drive
8
Master
7
Bass
5
Mid
5
Treble
7
Presence
7

Effects chain

  1. 1noise gateNoise GateRelease 5 · Threshold 5
  2. 2overdriveBoostGain 5 · Level 8
  3. 3distortionMetal DistortionGain 8 · Tone 6 · Level 7

Playing tips

  • Focus on tight palm muting for chugging riffs.
  • Use aggressive pick attack to enhance articulation.
  • Keep your picking hand close to the bridge for a percussive sound.

The original rig

What Slayer used on the recording, for reference. ToneAdapt translates this to the controls your NUX MG-100 actually has.

Guitar
B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era)
Amp
Marshall JCM800 2203
Gain
8.5
Bass
5
Mid
5.5
Treble
7
Presence
7
Reverb
0
Full Raining Blood tone breakdown, effects and sources →

Different guitar or pedals? Get Raining Blood adapted to your exact rig

These settings were generated for the gear named above. ToneAdapt adapts Slayer's tone to your own guitar, pickups, amp and pedals in seconds.

Frequently asked questions

What amp model should I use on the NUX MG-100 for Raining Blood?

Use the BRITISH LEAD (MARSHALL JCM800) (lead channel) with Drive 8, Master 7, Bass 5, Mid 5, Treble 7, Presence 7, followed by Noise Gate, Boost, Metal Distortion.

Which pickup should I use for Raining Blood?

Bridge pickup, with the guitar's tone at 7-8 and volume at 8-9.

What gear did Slayer use on Raining Blood?

Guitar: B.C. Rich Bich (circa 1986, as seen in live footage and consistent with studio era). Amp: Marshall JCM800 2203.

Will these settings work with my guitar?

These settings were adapted for a Gibson Les Paul. Different pickups change how much gain and treble you need. ToneAdapt adapts the tone to your exact guitar, pickups, amp and pedals.

Popular songs on the NUX MG-100

All 17 songs for the NUX MG-100 →

Settings are generated by ToneAdapt's tone adaptation for the gear named on this page and are a starting point — every amp, guitar and room is a little different.